High Brightness 18W SMD LED Tube

Product Details:
Place Origin: Guangdong, China(Mainland)
Brand Name: KingWin
Model Number: KW-T10x18CX02-WW
Length: 1200mm
Diameter: 26mm
Input Power: 18W
LED Type: SMD3528
LED QTY: 288PCS
Input Voltage: AC85-265V
Lamp Holder/base: G13
Light Source: Taiwan LEDs
Material: PC+AL
Sharpe: Round
Color Temperature: Warm White 3000-3500K
Luminous efficient lm/w: 105lm/w
Operating Frequency: 50-60Hz
Power factor: >=0.9
View angle: 120
Color: White, Warm white, Cool White

T10 SMD LED Tube
1. Certificates: CE & RoHS
2, Inpute Votage: AC85-265V
3. Working temperature-40~+50
4. Lifespan over: 50, 000Hrs
5. Color rendering Index CRI: 85

Features:

1. LED Tube is Much Longer life than CFL tube: 50000 hours (Fluorescent tubes 300 hours)
2. LED Tube is 70%~80% Energy-saving over Fluorescent tubes, Power factor is over 0.90
3. PC or Acrylic material is not easy broken. Solid State, high shock/vibration resistant;
4. Working without ballast
5. Luminous efficacy of LED tube is higher.
6. No flickering or buzzing, No RF interference.
7. Quick and easy installation to minimize retrofit costs
8. Instant soft-start
9. Minimum maintenance costs
10. Produce little Heat
11. No Mercury and other hazardous materials, fully RoHS-compliant.
12. Rated to operate from -40° F to 122° F [-40° C to 50° C], perfect for environments with extreme climates
13. Nice and elegant appearance, incorporated design for the pins and end part of the light body.

Installation
1. Standard installtion: Connect directly to AC power. This is the most saving energy mode
2. Replacing installation: If there is a starter on the old fluorescent light fixture. Remove the starter.
3. Remove Electronic Ballast: If there is no starter on the fluorenscent light fixture, Remove the electronic ballast.

Usage Notes:

1. Standard warranty period 3 years; The validity of the product warranty is subject to the correct storage, installation, operation and maintenance of this product.
2. only accredited electrical staff can disassemble and assemble the tube.
3. Protective measures should be taken while installation.
4. Electronic ballast and starter MUST be taken away from the existing fixture of CFL before installing Light-Sky Tube
5. Light-Sky tube is of indoor design. Never install tubes in humid environments. Non submergible.
6. Not for use in fully enclosed fixtures. Operate in fixtures that provide the free flow of air around the lamp heat sink.
7. Please contact us for information regarding how to best ventilate enclosed fixtures.